Sunday, 19 October 2014

Electrical projects 2014


1. Personal Computer Based Electrical Load Control

The main objective of this project is to control electrical appliances by using personal computer.For example,lighting in theaters can be controlled from a personal computer to manage the stage appearance.
Personal Computer Based Electrical Load Control  Project Kit From Edgefx
Personal Computer Based Electrical Load Control Project Kit From Edgefx
Currently, lightings are managed manually, which makes it problematic to manage the lighting with respect to the scene. With this Control system, one can switch the electrical machines’on’ or ‘off’ by simply sitting at one place using a Personal Computer.

2. High Voltage Direct Current Operation by Marx Generator Principle

The project is designed for generating a high-voltage Direct Current using Marx generator principle with the help of MOSFET and capacitor stacks. The Marx Principle was established by Erwin Otto Marx.
High Voltage Direct Current Operation by Marx Generator Principle
High Voltage Direct Current Operation by Marx Generator Principle
Marx principle states that “to generate a high voltage pulse using a number of capacitors in parallel to charge up during the on time, and then connected in series to develop higher voltage during the off period”.
These are a few latest and simple electronics projects for EEE as well as ECE students.We hope that now you are ready to pick the best one from the above list, and also from the introduction given for some projects. You can write to us, in the comment section below, for any other information on the above projects and also to get technical help for your idea for which you are going to implement a project.

Electronics project 2014


1. Electronic Eye Based Security System

The project is proposed as a security system with a photo-sensing arrangement. This system makes use of a 14-stage ripple carry binary counter to sense the light intensity through Light Dependent Resistor. The output drives a buzzer and a relay to perform the necessary action. This conception is very convenient to detect intruders in banks, shopping malls, jewelry stores and also in homes.
Electronic Eye Based Security System
Electronic Eye Based Security System
The system is dependent on an electronic eye: known as LDR sensor.When light falls on the sensor, its resistance slightly reduces and leads to generate an alarm for alerting the user. This arrangement best suits as a friendly security system for lockers to protect valuable ornamentsusually found in shopping malls, jeweler shops, and banks, etc.

2. Pre-Programmed Digital Scrolling Message Display System

This project is designed for displaying messages in scrolling format on an alphanumeric Light Emitting Diode displays. This type of scrolling display system is seen in most common places like public areas, transport vehicles, buses, railway stations, nationalized banks, hotels, nightclubs, etc.
In this system, a Direct Current voltage of 5 Volts drawn from a power supply is fed into an 8051 microcontroller. This circuit makes use of 16-segment alphanumeric displays for displaying 16 characters at a time.
Pre-Programmed Digital Scrolling Message Display System
Pre-Programmed Digital Scrolling Message Display System
The microcontroller programming is done in such a way that it displays 16 characters in a beautiful manner. This scrolling display system displays 16 different messages to illustrate different occasions, which can be selected by the user with the help of slide switches. The usage of alphanumeric displays for the above purpose reduces the work load, and it is very cost effective.

Sunday, 28 September 2014

Latest Electronics Project Ideas for Engineering Students:

SNO
Project Title
1
2 to 4 Amp arduino Based Motor Shield
2
3D Notice Board using LED Cube
3
A Multiple Bots Operated with a Single Base Station
4
A Swarm of Mutually Interacting Metal Detecting Robots For Scanning the Area
5
Accident Detection and Avoidance System Using Doppler Radar Interfaced with ATMEGA16
6
AES128 Encrypted hardware Lock Using AVR ATMEGA-16
7
AES256 bit Highly Encrypted Image Steganography
8
Android based Home Automation System
9
Android Based Waveform Analyser
10
Android Based Waveform Generator
11
Android Controlled Wheel Chair for the Physically Handicapped
12
Arduino Based Earthquake Detection Social Network Broadcast system
13
Arduino Based Online Database Interfacing
14
Arduino Based Swarm Bots
15
Arduino based Waveform Generator For Electronics Laboratory
16
Arduino Based World Intelligent Event Detection and Alert System with Network Interface
17
Arduino Ethernet Interface for Industrial Automation
18
Ariel Red Herrings to Mislead Missile Tracking Systems
19
Auto Braking System For Cars Detecting Momentum and Road Irregularities
20
Automatic Elevator Light and Fan Controller
21
Automatic Road Level Detection And Alerting System for Cars
22
Automatic Room Light Controller with Bidirectional Visitor Counter
23
Automatic Solar Tracker
24
Automatic Threshold Detection System for Phase Preserving Image Denoising
25
Automatic Vehicle Image Capturing When Overriding traffic lights
26
AVR based Heart Rate Monitoring System With Health level Indicator
27
Background Interpolation for Selective Image Cancellation
28
Bluetooth Controlled Robot
29
Camouflaged Voice Recording and Transmitting System
30
Cell Phone Operated Land Rover
31
Combinatorial Digital Circuit Logic Determining Device
32
Comprehensive Threat Detection for Offices
33
Continuous Speech Processing Using Python
34
Continuous Speech to Text Conversion for Indian Languages
35
DNA Based Mathematical Calculator
36
DTMF Based Car Lock System
37
Easy to Use Automatic Light Controller to Turn ON Lights In Dark
38
Electromagnetic Climbing Robots for Industries
39
Electronic Dog to Sense The Proximity of a Specific Purpose
40
Electronic Nose to Indicate gas Leakage in Underground Mines and Industries
41
Electronic Notepad
42
Fabrics That Generate Energy using Dye Based Solar Cells
43
Facebook Connected Arduino And Intelligent Event Reporting
44
Finger Print Based Security System
45
Fire Powered Mini Portable Power Supply
46
Flash Memory with Self Destroy Master Lock
47
Frequency Counter Using Smartphone
48
Gesture Operated Wheel Chair
49
GPS enabled Quadracopter
50
Hardware Authentication Dongle with Fingerprint Recognition

Saturday, 13 September 2014

CAMPUS RECRUITMENT TRAINING


Directions: (Q. 1 – 5): Each of the questions below consists of a question and two statements numbered I and II given below it. You have to decide whether the data provided in the statements are sufficient to answer the question. Read both the statements and give answer.
(i) If the data in statement I alone are sufficient to answer the question, while the data in statement II alone are not sufficient to answer the question.
(ii) If the data in statement II alone are sufficient to answer the question, while the data in statement I alone are not sufficient to answer the question.
(iii) If the data in both statements I and II even together are not sufficient to answer the question.
(iv) If the data in both statements I and II together are necessary to answer the question.

1.         P is in which direction of Q?
I.          S is to the west of Q, which is to the east of T.
II.          R is to the south of T, which is to the south of P.       

2.         In a certain code language what does ‘rose’ mean?
I.          ‘ho nu ma’ means ‘rose and apple’ in that code language.
II.          ‘po do ho’ means ‘rose is beautiful’ in that code language.

3.         Who among A, E, I, O and U is the tallest?
I.          I is taller than A, O and E but shorter than U.
II.          O and E are shorter than U but taller than A and I.

4.         M, N, O, P and Q are seated around a circular table facing the center. Who is on the immediate right of N?
I.          P is sitting between O and M.
II.          N is on the immediate right of M.

5.         What is the relation between F and J?
I.          X has two daughters, one of whom is F.
II.          The mother of F, Y, has only two daughters, one of whom, K, is married to J.

Directions (Q. 6 – 10): Read the following information carefully and answer the questions given below it:
Four students P, Q, R and S each working under the super vision of one of the four professors A, B, C and D made their final year MBA Project Presentations one by one, one each in the areas of Finance, Marketing, Systems and Human Resource Management (HRM). Each professor is an expert in only one of the above areas and supervised exactly one of the above students in his own area. The following are the clues:
(i) First presentation was made by R.
(ii) Prof. B works in Finance.
(iii) Prof. D was P’s supervisor.
(iv) The last presentation was in the Systems area.
(v) S’s project was in the HRM area.
(vi) Prof. B’s student’s presentation followed that of Prof. C’s student.

6.         In which area was R’s Project?
(a) Marketing            (b) Finance                (c) Systems                (d) HRM

7.         What is the area of expertise of Prof. D?
(a) HRM                      (b) Marketing            (c) Systems                (d) Finance

8.         In which area was the second presentation?
(a) Finance                  (b) Marketing           (c) Systems                 (d) Cannot be determined

9.         Which student’s project did Prof. B supervise?
(a) Q                              (b) R                           (c) S                              (d) P

10.       What is the area of expertise of Prof. A?
(a) HRM                    (b) Systems               (c) Marketing             (d) Either Marketing of HRM

Directions (Q. 11 – 15):
Five friends Manish, Ashish, Rahul, Kapil and Pravin are musician, architect, doctor, engineer and artist by profession and live in Lucknow, Mumbai, Kolkata, Delhi and Pune but not in that order.

(i) Pravin and Rahul do not live in Lucknow or Pune, and neither of them is an architect or doctor.
(ii) Manish and Ashish are not artist or engineer and they do not live in Delhi or Lucknow.
(iii) Kapil is neither a doctor nor a musician.
(iv) The person living in Lucknow is neither an artist nor an engineer.
(v) Manish does not live in Kolkata and Ashish is not a doctor.
(vi) The musician does not live in Pune or Mumbai.
(vii) Pravin is not an artist.
(viii) The artist does not live in Delhi.

11.       Who lives in Lucknow?
(a) Ashish                   (b) Kapil                     (c) Manish                 (d) Cannot say

12.       Kapil is a/an
(a) Musician              (b) Artist                     (c) Architect             (d) Cannot say

13.       Who is the artist?
(a) Rahul                    (b) Pravin                   (c) Ashish                   (d) Cannot say

14.       The engineer who lives in Delhi is
(a) Kapil                     (b) Pravin                   (c) Rahul                    (d) Manish

15.       The musician lives in
(a) Kolkata                (b) Delhi                     (c) Lucknow              (d) Cannot say

Directions (Q. 16 – 19): Read the following information carefully and answer the questions given below:
In a certain code, the symbol for 0 is $, for 1 is ∆ and for 2 is ●. There are no other symbols for all other numbers greater than 2. The numbers greater than 2 are to be written only with the help of the symbols given above. The value of 1 and 2 triples every time it shifts one place to the left. Study the following examples:
0 is written as $         1 is written as ∆         2 is written as ●
3 is written as ∆ $      4 is written as ∆ ∆      5 is written as ∆ ●
6 is written as ● $ and so on

16.       Which of the following will represent ● ∆ $ ● ∆ $?
(a)  588                        (b) 593                        (c) 592                        (d) 591

17.       Which of the following will be code for 319?
(a) ∆ ∆  ● ● ∆ ∆           (b) ∆ $ ● ● ∆ ∆            (c) ∆ ∆ ● ● $ ∆            (d) ∆  ● ∆ ● ● $

18.       Which of the following numbers will be represented by ● ● ∆ ∆ $ $?
(a)  304                        (b) 407                        (c) 684                        (d) 683

19.       Which of the following will represent the value of 18 + 18 ÷ 18 of 2 + 1 ÷ 2
(a) $ ● ∆                      (b) ∆ $ ●                      (c) ∆ ● $                      (d) ● $  ∆

Q (20 – 24):
In a family of eight persons  – P, Q, R, S, T, U, V and W – there are four males and four females. There are three married couples and two persons are unmarried. Each of them reads a different magazine, namely India Today (E), India Today (H), Outlook (E), Outlook (H), Frontline, The Week, Business world and Sports star. No couple reads both the versions of the same magazine.
In the family of two generations, each male member except W has two brothers and one sister. V is the mother-in-law of R and who reads India Today (H).
Q, who reads Out look (E), is the daughter-in-law of W. T, who reads Frontline, is the unmarried brother of U, who does not read Business world. No female reads Outlook (H) or The Week. S is the brother-in-law of R but does not read Business World, Sports Star or The Week. P does not read The Week. W has no son-in-law. U is Q’s sister-in-law.

20.       Who among the following reads Outlook (H)?
            (a) R                            (b) S                            (c) P                            (d) Cannot say

21.       R reads which of the following magazine?
            (a) Sports star            (b) India Today (E)    (c) Business world    (d) Cannot say

22.       Which of the following pairs of persons does not represent the couples?
            I. W and V                  II. P and R                   III. S and Q
(a) Only I    (b) Only II    (c) Only III   (d) All of the above pairs of persons represent the couples

23.       How many sons does W have?
(a) Two                       (b) Three                    (c) One                      (d) Cannot say

24.       How is P related with U?
(a) Father                   (b) Brother                 (c) Husband              (d) Cannot say

Questions (25 – 30): J, L, M, N, O and P are members of a spy network. For security reasons, only certain spies are able to contact other spies. The only contacts allowed are:
 J can contact both L and N.
O can be contacted by L, M and P.
N can contact M.
O can contact both L and N.
P can be contacted by M.
A spy can receive a message from any spy who can contact him and, in turn, relay the message to any spy he is able to contact.

25.       Which of the following spies can not be contacted by any other spy in the network?
(a) J                            (b) M                           (c) N                           (d) O

26.       N can get a message to which of the following spies by using exactly one intermediate contact?
I. O                  II. L                   III. P
(a) I only                     (b) III only                   (c) I and III only         (d) II and III only

27.       How O can send a message to M?
(a) O can contact M directly                    (b) O can send a message to M via J
(c) O can send a message to M via L     (d) O can send a message to M via N

28.       If, for security reasons, O cannot be contacted, which of the following messages can be sent, either directly or with an intermediary?
(a) J to P                    (b) L to M                   (c) L to N                    (d) M to L

29.       If the following messages were sent using the smallest possible number of intermediaries, which message would require the greatest number of intermediaries?
(a) J to P                    (b) L to O                   (c) M to N                  (d) N to O

30.       If, for security reasons, N cannot be contacted, which of the following message can not be sent, either directly or through an intermediary?

(a) J to O                   (b) J to P                    (c) M to L                   (d) M to O



TOP 5 candidates who hits the correct option for all the 30 will be rewarded 
with the recharge of RS.20.
comment your mobile no with the answer.