Sunday, 19 October 2014

Electrical projects 2014


1. Personal Computer Based Electrical Load Control

The main objective of this project is to control electrical appliances by using personal computer.For example,lighting in theaters can be controlled from a personal computer to manage the stage appearance.
Personal Computer Based Electrical Load Control  Project Kit From Edgefx
Personal Computer Based Electrical Load Control Project Kit From Edgefx
Currently, lightings are managed manually, which makes it problematic to manage the lighting with respect to the scene. With this Control system, one can switch the electrical machines’on’ or ‘off’ by simply sitting at one place using a Personal Computer.

2. High Voltage Direct Current Operation by Marx Generator Principle

The project is designed for generating a high-voltage Direct Current using Marx generator principle with the help of MOSFET and capacitor stacks. The Marx Principle was established by Erwin Otto Marx.
High Voltage Direct Current Operation by Marx Generator Principle
High Voltage Direct Current Operation by Marx Generator Principle
Marx principle states that “to generate a high voltage pulse using a number of capacitors in parallel to charge up during the on time, and then connected in series to develop higher voltage during the off period”.
These are a few latest and simple electronics projects for EEE as well as ECE students.We hope that now you are ready to pick the best one from the above list, and also from the introduction given for some projects. You can write to us, in the comment section below, for any other information on the above projects and also to get technical help for your idea for which you are going to implement a project.

Electronics project 2014


1. Electronic Eye Based Security System

The project is proposed as a security system with a photo-sensing arrangement. This system makes use of a 14-stage ripple carry binary counter to sense the light intensity through Light Dependent Resistor. The output drives a buzzer and a relay to perform the necessary action. This conception is very convenient to detect intruders in banks, shopping malls, jewelry stores and also in homes.
Electronic Eye Based Security System
Electronic Eye Based Security System
The system is dependent on an electronic eye: known as LDR sensor.When light falls on the sensor, its resistance slightly reduces and leads to generate an alarm for alerting the user. This arrangement best suits as a friendly security system for lockers to protect valuable ornamentsusually found in shopping malls, jeweler shops, and banks, etc.

2. Pre-Programmed Digital Scrolling Message Display System

This project is designed for displaying messages in scrolling format on an alphanumeric Light Emitting Diode displays. This type of scrolling display system is seen in most common places like public areas, transport vehicles, buses, railway stations, nationalized banks, hotels, nightclubs, etc.
In this system, a Direct Current voltage of 5 Volts drawn from a power supply is fed into an 8051 microcontroller. This circuit makes use of 16-segment alphanumeric displays for displaying 16 characters at a time.
Pre-Programmed Digital Scrolling Message Display System
Pre-Programmed Digital Scrolling Message Display System
The microcontroller programming is done in such a way that it displays 16 characters in a beautiful manner. This scrolling display system displays 16 different messages to illustrate different occasions, which can be selected by the user with the help of slide switches. The usage of alphanumeric displays for the above purpose reduces the work load, and it is very cost effective.